Chao Feng Electric Co., Ltd., Henan » WH-VI-36kw high frequency http:///2 Chao Feng Electric Co., Ltd., Henan Mon, 22 Dec 2014 07:40:32 +0000 en-US hourly 1 http://wordpress.org/?v=3.6 Model WH-VI-30 high frequency furnace price $11000 http:///2/?p=708 http:///2/?p=708#comments Fri, 18 Apr 2014 00:47:07 +0000 admin http:///2/?p=708 Power?new energy saving and environmental protection?type?WH-VI-30?high frequency furnace?is 30KW,?the power consumption is 15KW/h?for?province half?electric:?adopt IGBT chip?imports,?the integrated use of?8 modules,?the durability?is?a floor.

WH-VI-16 high frequency furnace

WH-VI-16 high frequency furnace

 

High frequency furnace?of the use of 30KW?and 16KW high frequency?furnace?shell?in?the same machine,?industrial?blue tones,?paint does not?touch ash,?easy?cleaning and maintenance.

The?equipment panel?is easy to operate,?a?display?with?time?and temperature sensing.?Can be more?direct?control,?switch?in front.?Regulation?only?operation according to the?Henan superFeng?electrical manual?debugging,?simple,?a school will.

30KW?high frequency furnace?used for?screw?heating,?the small gear?shaft?heating,?quenching?and so on,?the heating?effect is stable,?bring a lot of?benefits to the customer,?and the priceis low,?many?manufacturers.

 

 

 

Model WH-VI-30?high frequency furnace?screw?heating::

30KW high frequency furnace screw heating

30KW high frequency furnace screw heating

 

The device?for a second?heating can be?a?screw,greatly enhance the?work efficiency.

 

 

 

 

 

Model WH-VI-30?high frequency furnace?pinion?and?shaftquenching?diagram:

The small gear shaft frequency quenching

The small gear shaft frequency quenching

 

Characteristics of?induction coil,?let the?quenching?is more uniform,?faster.?It only takes a few?seconds to complete theheating.

]]>
http:///2/?feed=rss2&p=708 0
36Kw high frequency welding machine http:///2/?p=269 http:///2/?p=269#comments Sat, 12 Oct 2013 06:35:07 +0000 admin http:///2/?p=269 WH-VI-40

36KW?high frequency welding machine?ultra?high frequency?application range?front?|?inductionwelding?machine:

 

Supply?good?quality?high-frequency welding machinesuper?Feng card?various turning?welding?weldingwelding,?milling,?planing,?all kinds of woodworking tool?welding,?various bits of?welding,?such as:geological drill,?bit of oil,?coal?bit?welding,?can also be used for the?shearer?ruler?welding,?cuttingruler?excavator?welding,?welding?of diamond saw blade,?hard alloy saw blade,?cutting tool?welding,application scope is quite widespread,?welcome?tovisit our company?needs.

 

The main?characteristics of the welding?machine?36KWHenan Chao?Feng electrical equipment?limited company:?high frequency?power?tools:?than theelectron tube?power 30%,?than?the thyristor medium frequency?power 20%.?stable performance:?complete protection,?no worries.?Fast heating speed:?without oxidation layer,?small deformation.?After welding,exquisite appearance,?uniform heating,?so there is no?lack of?welding?and leakage?solder joints.?Our company?is an old?enterprise do?high-frequencywelding,?with rich experience,?more than 20 years ofadvanced technology,?equipment?can be assured use.

 

Model /?configuration 36

 

The working power?three-phase?380V/50HZ

 

Working voltage 342V-430V

 

The maximum input?current 55A?bus

 

The maximum output?current of 30KVA

 

The oscillation frequency?of 15-45KHZ

 

The efficiency of 90%

 

Load sustained rate of 100%

 

The cooling?water flow rate 15Lmin?(0.1mp)

 

Cooling water pressure?0.1-0.3mp

 

Host weight?45Kg

 

Transformer weight

 

Machine dimension?580*280*510

 

Transformer?size

 

The host?color?blue?/ white

 

Transformer?color

 

Special?application field?drill rod?diathermy,?bitwelded small?shaft

 

The water temperature?at 50?℃?protection

 

]]>
http:///2/?feed=rss2&p=269 0