The three category selection guide of high frequency induction heating equipment

With the development of economy,?the metal?of high frequency induction heating?industry?make a spurt of progress,?many

brands.?Henan Chao?Feng electrical equipment?limited company?as a member of?the induction heating?equipment manufacturers?of them,we have the responsibility to?processing?industry?to contribute their?meager strength for the?metal heat,ultra?front?experts today?for?selection?this piecemake some?elaborate,?hoping to help you!!

A,?welding equipment

The frequency?of around 15Khz,?Φ 80. Heat the workpiece, can weld various hard alloy cutter

Hot Heading?1,?standard parts,?fasteners.

2,?rock drill,?drill?tempering,?forging,?extrusionand other heating.

3?diamond saw blade.?Drill pipe?welding.

The welding of 4?bit,?coal drill bit,?drill?rod,pick?liu.

The 5?tool,?cutter,?welding,?milling cutter and?all kinds of woodworking?tool.

Two,?the quenching?equipment

The frequency?of around 40Khz,?small?can?quench?Φ 10 high precision small shaft, hardened layer to keep 1m

In?large,?quenching?of Φ 250 diameter shaft, can also be quenched?Φ 500 gea

Quenching treatment?1,?auto parts,?motorcycle accessories.

Heat treatment 2,?mechanical parts,?such as?gear,sprocket?quenching treatment,?all kinds of shaft,spline shaft,?pin?etc..

Quenching?machine tool?bed?rail 3,?the machine tool industry.

Heat treatment 4,?pliers,?wrenches,?screwdrivers,hammers,?axes?and other.

Three,?annealing?equipment

The various?parts?of?a whole or partial?annealing.

Can be stretched?annealing on?Φ 300 diameter stainless steel container

High frequency furnace?has been widely used in:fasteners,?standard parts,?auto parts,?hardware tools,?rigging,?hemp flowers?drilling?hot,?hot upsetting;

Principle:?the diameter of the workpiece?is larger,the lower?frequency?should be selected.

Such as the application of?high frequency?UHF?Φ 4-16MM Φ 16-40mm suitable for high frequency, suitable for ultra audio frequen

Principle:?the workpiece requirement?hardened layeris?shallow,?the frequency?should be higher.?Such as:1mm,?suitable for?ultra high frequency?1.0-1.5mm,suitable for high frequency;?1.5-3.0mm,?for superaudio

According to the?selection of?appropriate?production efficiency?power?bigger,?faster.?The?consulting company?technical personnel

Heat treatment?of shaft,?gear,?sprocket,?machine tool?accessories,?metal wire annealing,?hydraulic fittings,?automobile fittings,?clamp cutlery,stainless steel pot?annealing

Combined with the?comprehensive consideration of?the shape of the workpiece,?quenching,?quenching hardness,?hardened layer?requirements?and material,the specific?technical advisory staff?Henan ChaoFeng electrical equipment?limited company?159-9369-2891.

Composite?welding?principle?of different materials,tools,?soldering?bit?reamer,?milling cutter,?drilland stainless steel?pot:?the bigger the?welding,?the frequency is?reduced.

The volume is less than?30*30*30?tool,?can use?high frequency;?according to the?specific shape of the workpiece,?material,?such as solder?circumstances.

High frequency heating?melting?gold,?silver,?copper,zinc,?aluminum and other?precious metal?small capacity?optional?ultra audio frequency,?high capacity?medium frequency?furnace?and the production efficiency are?optional?according to?specific anddefinite.